Perkins launch­es next gen­er­a­tion 2600 Series engine

 

BU Train­ing: Engine exper­tise at the high­est level

 

Perkins® Elec­tric Pow­er Stage V Event

 

BU Ser­vice — reli­able, quick and competent

1 4
1 4

BU Pow­er Sys­tems News

BU Pow­er Sys­tems News
21. Decem­ber 2023

Perkins launch­es next gen­er­a­tion 2600 Series engine

One engine. End­less pos­si­bil­i­ties. The inno­v­a­tive Perkins 2600 Series engines fit up to 515 kW/690 hp into a 13-litre foot­print – deliv­er­ing more pow­er and per­for­mance, while tak­ing up less space. Its max­imised pow­er den­si­ty and proven dura­bil­i­ty make it… 
BU Pow­er Sys­tems News
12. Decem­ber 2023

BU Train­ing: Engine exper­tise at the high­est level

At our inter­na­tion­al, Perkins-cer­ti­fied train­ing cen­tre in Ibben­büren, Ger­many we pro­vide unique engine know-how. Our train­ing team is there for our OEM cus­tomers and their deal­er organ­i­sa­tions – with exper­tise at the high­est lev­el. In addi­tion to the cours­es at… 
BU Pow­er Sys­tems News
6. Decem­ber 2023

Perkins® Elec­tric Pow­er Stage V Event

From 29 to 30 Novem­ber an event for the Perkins® Elec­tric Pow­er Stage V engine series took place in Perkins head­quar­ters in Peter­bor­ough. Togeth­er with our cus­tomers we got a high-lev­el tech­ni­cal insight into the Stage V Elec­tric Pow­er engine… 
BU Pow­er Sys­tems News
10. Novem­ber 2023

BU Ser­vice — reli­able, quick and competent

Almost like James Bond. Not in the ser­vice of Her Majesty, but for our cus­tomer Ghel­ma AG Baube­triebe the tech­ni­cians from BU Pow­er Sys­tems were now in action on the Schilthorn in the Bernese Alps at 2,970 m above sea… 
BU Pow­er Sys­tems News
17. August 2023

Col­lab­o­ra­tion Pow­er: BU Pow­er Sys­tems and Geot­ec Bohrtech­nik GmbH

Geot­ec Bohrtech­nik GmbH has been devel­op­ing and build­ing high-qual­i­ty ver­ti­cal drilling rigs for over 25 years. These are pri­mar­i­ly used for near-sur­face geot­her­mal ener­gy extrac­tion, geot­ech­ni­cal engi­neer­ing, old min­ing and well con­struc­tion, but are also ide­al­ly suit­ed for dry drilling… 
Archive

More news in our news archive …

Did you know that…

Did you know that…
28. Novem­ber 2023

…a wiring har­ness with an aver­age length of more than 66 metres of cable is installed on Perkins engines?

That’s the same as the wingspan of a Boe­ing 747. The wiring har­ness con­nects all the elec­tri­cal and elec­tron­ic com­po­nents of your engine and as a sen­si­tive nerve strand it forms the basis for a func­tion­ing engine. Elec­tri­cal com­po­nents such… 
Did you know that…
31. August 2023

…Perkins has already pro­duced 22 mil­lion engines since 1932?

That is twice as many engines as there are chil­dren born per month world­wide. That is twice as many engines as there are chil­dren born per month world­wide. Per­haps one of these many engines is in your machine. As an… 
Did you know that…
5. July 2023

…Perkins water pumps can pump around 360,000 litres of coolant in 24 hours of operation?

That’s the equiv­a­lent of 2,378 full bath­tubs. In a cir­cuit, the water pump feeds cold water into the engine to cool it down. The water is heat­ed up by the high tem­per­a­ture of the engine and then trans­port­ed out of… 
Archive

More from the “Did you know that…” blog …